Recent Changes - Search:

G3 Wiki Read First

* HomePage

* What is Gauge 3?

How To Contribute Content

Contact Administrator


* Pop Rivets and Underframes

* Modify your Sieg C2A Lathe

* Assembling a low cost CNC Router / Laser Etcher

* OpenSCAD and Sample 3D Print Files

* Extended Guide to 3D Printing

Adding Material

DocRef: Admin7a

For an article to be submitted or other material proposed for the consideration of the Moderators and Editors.

Read through these six instructions and when you are happy with them, click on the link below.

1. After clicking on the link, you will see the text area. Click on the Edit button on the Bottom Left Hand Side.

2. If the screen area is not clear then remove all the text from it.

3. Type your article onto the screen area or cut and paste from a previously typed document.

4. Remember to add your real name and e-mail address at the end of your article. Please include your membership number if you are a G3S member.

5. When you have completed this, then in the bottom left hand side of the screen area you will find the Save Draft button -click this.

6. It would be helpful for you to clear your article from the screen area and then click the Save Draft button again.

This will save the next user from having to carry out step 2.

Add New Material to the Wiki.

We ask that you include your real name and e-mail address so that we can contact you. This may be necessary should the article need some clarification.

Your details will not be shown unless you wish them to be.

To upload images to the Wiki

You may upload images by requesting an upload link from the Enquiry Form

If you wish to become a regular Author, Editor or Moderator, then please complete the Enquiry Form

Edit - History - Print - Recent Changes - Search
Page last modified on February 27, 2018, at 11:12 PM