Gresley Coaches

Screenshots of STL modules contained in

downloadable ZIP files of coach roofs.

Coach Roof Packs

Prints in two complementary parts with alignment spigots : Fit between the carriage ends and flush with end roof profile.

D120 32ft 4-wheel PBV

STL DOWNLOAD

52ft 6in Gangwayed Stock

STL DOWNLOAD

51ft 1½in Compartment Stock (including  non-gangwayed PBV)

STL DOWNLOAD

Prints in three parts from two files : The central section fits between two outer sections which are identical and printed from the same file. The central section is slightly over-length for trimming to a precise fit. The outer sections fit onto the rebates in the domed end units and have spigots to locate/support the central section.

Prints in three parts from two files : The central section fits between two outer sections which are identical and printed from the same file. The central section is slightly over-length for trimming to a precise fit. The outer sections fit onto the rebates in the domed end units and have spigots to locate/support the central section.

Prints in three parts from two files : The central section fits between two outer sections which are identical and printed from the same file. The central section is slightly over-length for trimming to a precise fit. The outer sections have spigots to locate/support the central section and fit between the ends and flush with end roof profile.

onto the rebates in the domed end units and have spigots to locate/support the central section.

NOTE : If using FDM printer, these should be printed vertically, with roof outer end forming the base attached to printer bed. When generating G-code for the gangwayed roof parts, it is suggested you specify a “brim” to secure to print bed (not necessary with non-gangwayed coaches which have an in-filled end).

Coming Soon

61ft 6in Gangwayed Stock

STL DOWNLOAD