Recent Changes - Search:

G3 Wiki Read First

* HomePage

* What is Gauge 3?

How To Contribute Content

Contact Administrator


MOST RECENT UPDATES:

* Building the LMS Stanier Black 5

* Build GWR dia. AA11 "Toad" from a kit

* Machining Steel Wheels

Pointwork Control Example Mechanical

DocRef: JC7a

For other methods of point control see Pointwork Control : Overview

Two types of commercially available point lever are shown below. In both cases the linkage to the tie-bar has been formed from a galvanised steel paper clip and incorporates a loop to relieve strain.

First example is a Cliff Barker lever attached to a turnout built from Cliff Barker components

The second example is a Williams Models lever, again attached to a turnout built from Cliff Barker components. In the case of the Williams Models example, the lever has to be elevated from surface level to align with the tie-rod and to accommodate the "fish belly" shape of the underside of the lever casting.

Edit - History - Print - Recent Changes - Search
Page last modified on February 27, 2018, at 10:45 PM